Hayward PRO15-2 pH Sensor – Pool Automation Replacement Probe

Hayward PRO15-2 pH Sensor – Pool Automation Replacement Probe

Sale price  $633.15 CAD Regular price  $649.99 CAD
Skip to product information
Hayward PRO15-2 pH Sensor – Pool Automation Replacement Probe
1/3

Hayward PRO15-2 pH Sensor – Pool Automation Replacement Probe

Sale price  $633.15 CAD Regular price  $649.99 CAD

Hayward PRO15-2 pH Sensor – Replacement Probe for Pool Water Chemistry Systems

Maintain reliable pH monitoring in your compatible Hayward pool water chemistry control system with the Hayward PRO15-2 Replacement pH Sensor.

The Hayward PRO15-2 is a replacement pH probe designed for compatible Hayward water chemistry monitoring and control equipment. It measures the pH level of pool water and provides readings to the connected controller, helping the system monitor water balance.

A properly functioning pH sensor is an important part of an automated pool chemical management system. Replacing an aging, damaged, or unresponsive probe can help restore dependable pH readings when the sensor is the source of the problem.

Key Features & Benefits

  • Hayward Replacement Sensor: Identified by manufacturer part number PRO15-2.

  • pH Monitoring: Measures pool water pH for use by a compatible chemical controller.

  • Automated Water Chemistry Support: Provides pH measurement data to the connected control system.

  • Replacement for Worn Probes: Suitable when an existing compatible sensor has failed or deteriorated.

  • Water Balance Monitoring: Helps operators monitor a key parameter affecting pool water chemistry.

  • Pool Equipment Maintenance: Designed for servicing compatible Hayward monitoring systems.

  • Available in Canada: Offered by Splash Pool & Spa in Peterborough, Ontario.

Product Specifications

Specification Details
Product Replacement pH Sensor / Probe
Brand Hayward
Manufacturer Part Number PRO15-2
Sensor Type pH Measurement Probe
Measurement Pool Water pH
Application Compatible Hayward Water Chemistry Control Systems
Connector Type Confirm manufacturer specification
Cable Length Confirm manufacturer specification
Calibration Follow Hayward controller and sensor instructions
Package Contents One pH sensor, unless otherwise specified
Condition New

What Does a Pool pH Sensor Do?

A pH sensor measures how acidic or alkaline pool water is.

In compatible automated water chemistry systems, the sensor sends its measurement to a controller, which can use the information for monitoring and, where supported and properly configured, chemical dosing control.

Maintaining balanced pH is important for swimmer comfort, sanitizer performance, and the protection of pool surfaces and equipment.

A replacement sensor can help restore accurate monitoring when the original probe is no longer functioning correctly.

When Should You Replace Your Hayward pH Sensor?

A replacement may be necessary if:

  • The probe no longer responds correctly during calibration.

  • pH readings remain unstable or inconsistent after troubleshooting.

  • The sensor is physically damaged.

  • The probe has deteriorated due to age or improper storage.

  • A qualified pool technician determines the sensor is no longer operating within specification.

Important: Incorrect pH readings may also result from calibration issues, improper probe maintenance, damaged cables, or controller problems. Confirm the cause before replacing the sensor.

Compatibility & Fitment

The Hayward PRO15-2 is intended for compatible Hayward pool water chemistry monitoring equipment.

Before ordering, confirm:

  • Your existing probe is identified as PRO15-2 or an approved equivalent.

  • Your Hayward controller supports this sensor.

  • The electrical connector and installation requirements match.

  • The replacement meets your system's manufacturer specifications.

If you're unsure whether this probe is correct, contact Splash Pool & Spa with your Hayward controller model and the part number on your existing sensor.

Installation & Calibration

Installation should follow Hayward's instructions for the specific controller and sensor.

  1. Place the chemical controller and associated dosing equipment in the appropriate service mode.

  2. Follow the manufacturer's procedure for safely isolating the sensor installation point.

  3. Remove the existing probe according to the equipment instructions.

  4. Install the replacement sensor using the specified connection and mounting procedure.

  5. Connect the sensor to the compatible controller.

  6. Calibrate the new probe using the appropriate fresh pH calibration solutions and Hayward's recommended procedure.

  7. Verify the reading against a reliable independent pool water test before returning automated chemical dosing to normal operation.

Do not allow automated chemical dosing to rely on an unverified or incorrectly calibrated sensor.

Sensor Care & Maintenance

  • Follow Hayward's recommended cleaning and calibration schedule.

  • Use suitable calibration and storage solutions.

  • Avoid touching or scratching the sensitive measurement tip.

  • Do not allow the probe to dry out if the manufacturer requires wet storage.

  • Inspect cables and connectors during routine maintenance.

  • Replace the probe when it can no longer be calibrated or operates outside specification.

Frequently Asked Questions

What is the Hayward PRO15-2?

The PRO15-2 is a replacement pH sensor for compatible Hayward water chemistry monitoring systems.

What does this sensor measure?

It measures pH, which indicates how acidic or alkaline pool water is.

Is this an ORP sensor?

No. A pH sensor measures acidity and alkalinity. An ORP sensor measures oxidation-reduction potential and serves a different monitoring function.

Will this work with every Hayward pool controller?

No. Compatibility depends on the specific controller model and supported probe specifications.

Does a new pH sensor need calibration?

Follow Hayward's instructions for the specific sensor and controller. Calibration and verification are important before relying on readings for chemical dosing.

Does this include calibration solution?

Calibration solutions are not confirmed as included. Check the package contents and purchase the appropriate solutions separately if required.

Can I install the probe myself?

Installation requirements vary by controller and plumbing configuration. A qualified pool service technician is recommended, especially for automated chemical dosing systems.

Shop Hayward Pool Equipment Parts in Canada

Splash Pool & Spa is a Canadian pool and spa retailer located in Peterborough, Ontario.

We carry pool equipment, replacement parts, water testing supplies, chemicals, and maintenance products for residential and commercial pool care.

Order the Hayward PRO15-2 Replacement pH Sensor from Splash Pool & Spa, with shipping available across Canada and eligible U.S. destinations.

Reliable shipping

Flexible returns

You may also like